To get the best performance from your air system, clean the fins of the unit with either a garden hose or a special spray you can find at your local home improvement store. Use your hose to run a strong stream of water to remove any built-up dust or debris stuck in between the fins. Remember that air flows through these little fins, so if dirt gets caught in them or if a fin is bent, it will reduce the cooling efficiency. Use a butter knife or other knife with a dull end to carefully straighten out any smashed fins.

First off, HVAC stands for “Heating, Ventilation, and Air Conditioning,” while AC stands for just the last part: “Air Conditioning.” In other words, when we talk about AC, we’re generally talking about the system that cools the air in your home (although sometimes people do use the term AC to refer to units that provide heat as well, especially when they’re talking about heat pumps). However, when we talk about HVAC, we could be talking about a system that does either the heating or the cooling, or both.


“I'm always skeptical of AC companies, because we have had bad advice, installation, and poor customer service in the past. That is so far from our experience with Total Environmental. I know with 100 percent certainty they are doing what is best for us and our home. That peace of mind is priceless! They are helpful, knowledgeable, and easy to work with. They'll by my HVAC people as long as I have a home!”
You can install the greatest HVAC system ever built, but if your house is not insulated well, it's only going to end up costing you more money. Older homes may have fiberglass insulation that has broken down due to pests, moisture, or improper installation. Spray foam insulation can be damaged by careless repair or modification work or can be improperly installed. If your insulation in compromised, your attempts to save money and be comfortable will be in vain.
Getting one of the best air conditioner brands is important whether you’re replacing an old HVAC system, or having the first AC unit system put in your brand new home, but it’s not everything. The best Trane, Ruud, or American Standard HVAC system won’t perform any better than a no-name bargain air conditioner system if it’s not installed properly by a quality HVAC contractor. It’s important to find an HVAC installation professional with high ratings and expert knowledge within the field so that your top brand can perform at optimal efficiency.
Just had a well knowledge maintenance tech from A-OK come out and maintenance my AC unit and furnace. He informed me about all my safety’s were working properly and my Freon was well charged, cleaned my coils and drain, replaced my filter and checked the temps in all my supply’s. This young mans name was Mike and I would recommend him to come out to all my friends and family’s homes for maintenance.

Natural ventilation is the ventilation of a building with outside air without using fans or other mechanical systems. It can be via operable windows, louvers, or trickle vents when spaces are small and the architecture permits. In more complex schemes, warm air is allowed to rise and flow out high building openings to the outside (stack effect), causing cool outside air to be drawn into low building openings. Natural ventilation schemes can use very little energy, but care must be taken to ensure comfort. In warm or humid climates, maintaining thermal comfort solely via natural ventilation might not be possible. Air conditioning systems are used, either as backups or supplements. Air-side economizers also use outside air to condition spaces, but do so using fans, ducts, dampers, and control systems to introduce and distribute cool outdoor air when appropriate.

Coolray & Mr. Plumber have Smyrna, GA covered when it comes to air conditioning repair and installation, furnace repair and installation, plumbing service and more. We also offer a full range of HVAC and plumbing products to help meet the needs of Smyrna homeowners and businesses. We have been serving Smyrna, GA residents since 1966 and our HVAC technicians and plumbers have the experience and training to properly resolve all of your heating, cooling and plumbing issues. Our products include furnaces, air conditioners, heat pumps, geothermal HVAC systems, traditional water heaters, tankless water heaters, sump pumps, air cleaners & air purifiers and more. 


Keep your home comfortable all year round with Keep your home comfortable all year round with this high quality and efficient 14 SEER central heating and cooling heat pump system. This system is ideal for new or replacement residential or commercial applications and consists of the outdoor condenser indoor air handler with evaporator coil heat strip and 30 ...  More + Product Details Close
Heat pumps are similar to cooling only systems with one exception. A special valve in the refrigeration piping allow the refrigeration cycle to be operated in reverse. A cooling only system cools the indoor air and rejects heat to the outdoors. A heat pump can also cool the indoor air, but when the valve is reversed, the indoor air is heated. A supplementary electric resistance heater may also be used to assist the heat pump at lower outdoor temperatures. In colder climates, heat pumps require a defrost period. During defrost times the electric heater is the only means of heating the interior of the building. These units are manufactured as either split or packaged systems.

Because there are so many different potential causes of indoor air quality problems, it is necessary to determine with certainty just what issues you are dealing with in your home. The only way to do so is with the assistance of a qualified professional. Once we discover the source of your IAQ problems, we can go about resolving them with the proper products and services. Call today to enjoy improved indoor air quality in Issaquah, WA.


Air changes per hour Bake-out Building envelope Convection Dilution Domestic energy consumption Enthalpy Fluid dynamics Gas compressor Heat pump and refrigeration cycle Heat transfer Humidity Infiltration Latent heat Noise control Outgassing Particulates Psychrometrics Sensible heat Stack effect Thermal comfort Thermal destratification Thermal mass Thermodynamics Vapour pressure of water

Here at Baker Brothers, we know just how unbearable the heat in the DFW metroplex can be. That’s why we want your home’s air conditioning unit to be functioning properly. Whether you have a problem that you want to be solved now or just want to do preventative maintenance, we can help. Contact us today to schedule your HVAC service or repair in the Dallas & Fort Worth area!
You can adjust for seasons: During the summer, you can have the air conditioner stay off during the cooler morning hours and start cooling the house as everyone gets up and starts moving around. During the winter, you can have your heater stay off while you are away at work and turn on about a half hour or so before you get home so that you are coming home to a nice, warm house.
Attic Fan Installation Bathroom Fan Repair Ceiling Fan Installation Ceiling Fan Repair Electric Wall Heater Installation Electrical Panel Installation Electrical Panel Repair Electrical Panel Upgrade Electrical Wiring Installation Electrical Wiring Upgrade Exhaust Fan Installation Holiday Lighting Installation LED Interior Light Conversion Light Fixture Installation Light Fixture Repair Light Fixture Replacement Light Switch Installation Outlet Installation Outlet Repair Spa Wiring Installation

First off, HVAC stands for “Heating, Ventilation, and Air Conditioning,” while AC stands for just the last part: “Air Conditioning.” In other words, when we talk about AC, we’re generally talking about the system that cools the air in your home (although sometimes people do use the term AC to refer to units that provide heat as well, especially when they’re talking about heat pumps). However, when we talk about HVAC, we could be talking about a system that does either the heating or the cooling, or both.
We’ve lived our entire lives, and continue to work in Southern Maryland and parts of Virginia, and are committed to the local community. Both the loyalty of our long-term customers and our A+ BBB rating are a testament to our dedication. Exceeding your expectations for service and performance, T. N. Bowes Heating & Air Conditioning, Inc. delivers the results you’re looking for.
As this liquid passes through the indoor cooling coil on the inside of the heat exchanger, two things happen to the air that passes over the coil’s surface on the outside of the heat exchanger. The air’s temperature is lowered (sensible cooling) and moisture in the air is removed (latent cooling) if the indoor air dew point is higher than the temperature of the coil’s surface. The total cooling (capacity) of an AC system is the sum of the sensible and latent cooling. Many factors influence the cooling capacity of a DX air conditioner. Total cooling is inversely proportional to outdoor temperature. As the outdoor temperature increases the total capacity is reduced. Air flow over the indoor cooling coil also affects the coil’s capacity and is directly proportional to the total capacity of an AC system. As air flow increases, the total capacity also increases. At higher air flow rates the latent capacity of the cooling coil is reduced. Indoor temperature and humidity also affect the total capacity of the AC system. As indoor temperatures increase, the sensible capacity also increases. Similarly, as indoor relative humidity increases the latent capacity of the AC system increases. Manufacturers of AC equipment typically provide a “performance map” of specific equipment to show how total, sensible, and latent capacity change with changing indoor and outdoor temperatures and humidity. Power consumption and energy efficiency are also provided in these charts.
A vapour seal is an essential part of preventing moisture infiltration into or migration out of a critical space, such as a data processing centre or other room that contains sensitive electronic instrumentation.  Essentially, a vapour seal is a barrier that prevents air, moisture, and contaminants from migrating through tiny cracks or pores in the walls, floor, and ceiling into the critical space.  It is also used extensively on pipe insulation to prevent moisture ingress that may cause deterioration of the insulation or freezing in cold conditions.
Though Harrison had commercial success establishing a second ice company back in Sydney in 1860, he later entered the debate over how to compete against the American advantage of ice-refrigerated beef sales to the United Kingdom. He wrote: "Fresh meat frozen and packed as if for a voyage, so that the refrigerating process may be continued for any required period", and in 1873 prepared the sailing ship Norfolk for an experimental beef shipment to the United Kingdom. His choice of a cold room system instead of installing a refrigeration system upon the ship itself proved disastrous when the ice was consumed faster than expected.[citation needed]
Refrigerant Metering Device -- Every HVAC system has one of these, and heat pumps have two. They regulate the amount of refrigerant going through your air-conditioner. If it fails, either too much or too little refrigerant will course along the lines and either not perform well or will overwhelm the compressor and cause it to fail. A total failure of this component will result in a complete loss of operation.
Air handlers and furnaces aren't often found together. If you have a furnace you probably don't need to think about an air handler. Air handlers tend to be paired up with heat pumps and help manage air flow throughout the building. Some models also provide secondary heating and cooling parts to help out the heat pump. A furnace works on a different concept. Instead of an air handler, furnaces have included blowers that move the warmed air into your ventilation and disperse through your home. Since furnaces have combustion chambers and create heat, they don't have some of the parts you'll find in a typical air handler.
Though Harrison had commercial success establishing a second ice company back in Sydney in 1860, he later entered the debate over how to compete against the American advantage of ice-refrigerated beef sales to the United Kingdom. He wrote: "Fresh meat frozen and packed as if for a voyage, so that the refrigerating process may be continued for any required period", and in 1873 prepared the sailing ship Norfolk for an experimental beef shipment to the United Kingdom. His choice of a cold room system instead of installing a refrigeration system upon the ship itself proved disastrous when the ice was consumed faster than expected.[citation needed]

With that being said, we ask ourselves, “How do we ensure our customers that we are the company they can count on?”. It all starts with our people. Each of our team members have passed a criminal background and drug test, so you can trust them with your home and family. We are licensed and insured well beyond the minimum requirements set for by the State of Texas. Also, we provide continuous training for both the technical and customer service aspects of our industry. We do this in order to make sure that we are ready and able to serve your needs with excellence.

At BJ Heating & Cooling, our dedication to your comfort isn’t limited to five days a week. We are on call to provide the swift, knowledgeable service you need 24 hours a day, 365 days a year. Whether you require scheduled or Emergency Service, expect timely attention and no surprises. We outline the problem, offer upfront pricing, and provide the information necessary to make knowledgeable decisions. Rest assured, our team arrives fully prepared with the replacement parts, materials, and tools to manage a wide range of issues in a single visit.


Bigger is not necessarily better when it comes to HVAC systems, and smaller isn't always more efficient. If you have too small of a system, your system will be running constantly as it tries to keep up with the temperature. If you have too large of a system, it won't run long enough to keep up with the humidity. In order to handle both temperature and humidity efficiently, an HVAC system should run for around 30 minutes at a time. If your system is staying on too long or shutting off after only around 10 minutes, you are not getting efficient performance.
When it comes to your indoor winter comfort, you should never settle.  A perfectly warm home is important to your daily life, and the performance of your heating system impacts the safety, air quality, and cost of keeping an enjoyable home.  Sky Heating & Air Conditioning protects your ongoing satisfaction with a diverse range of quality heating products and services, including new system installation, replacement, seasonal maintenance, and repair.  We work to improve efficiency, reliability, and safety, and deliver corner to corner temperature control throughout the rooms of your home.  With 24/7 Emergency Services, you’re never left out in the cold.  Contact Sky Heating & Air Conditioning for heating service in The Dalles and Portland, OR, and we’ll provide the exemplary customer service that sets us apart.
×